Asphalt Impressions | Making Asphalt Beautiful

StreetPrint® Pavement Texturing is a proprietary decorative paving system that uses specially designed templates to imprint asphalt, and a surfacing system called StreetBond to color and fortify the surface. The result is a decorative paving system that replicates the appearance of hand-laid brick.

StreetPrint® Pavement Texturing is installed by a network of Authorized Applicators throughout North America and around the globe. Presently, there are over 600 Authorized Applicators in more than 30 countries worldwide.

The cost to install StreetPrint® varies depending upon the thickness of asphalt required, the amount of base preparation required, size of the project, StreetPrint® pattern and trim package chosen. In North America StreetPrint® generally provides the best value when compared to other decorative pavement systems.

StreetBond Surfacing Products are designed to wear with the grace and realism common to concrete brick pavers. The cement component of StreetBond, combined with the color pigments, provides for a realistic brick-like appearance. The surface is fade resistant and helps to repel harmful UV rays. As with all decorative paving systems there will be some wear over time.

Wear Rate

We have identified the following conditions which result in increased wear rates for StreetBond Surfacing Products.

Opening the StreetBonded surface up to traffic before the coating has completed its initial curing time.
Excessive traffic abuse (i.e. turning, stopping, accelerating).
Sand or other abrasive materials on the surface.
Studded snow tires.
Constant and prolonged exposure to water (i.e. poor drainage).
Application on very coarse asphalt which results in excessive flow off the tops of the stones leaving a very low build thickness on the wearing points.

What must also be kept in mind, and is usually forgotten, is that the wear associated with StreetBond Surfacing products is cosmetic. With other forms of decorative pavement the failure tends to be structural in nature, requiring a more expensive and disruptive repair. As long as the asphalt used has sufficient strength to resist pattern fading, the StreetPrint® application can be made to look like new by simply re-applying a fresh coat of StreetBond Surfacing Products. It should also be noted, at time of sale, that the cost of reapplying the StreetBond Surfacing Products would be significantly less than the cost of the initial application. At this time the color can also be changed, an option not available with other decorative paving systems.

StreetPrint® can be installed very quickly with relatively little disruption, so it is usually much less costly and disruptive than concrete alternatives. StreetPrint® uses asphalt as its base. Asphalt is a flexible surface that is more likely to accept shifting due to weather extremes and can resist cracking commonly associated with
other paving systems. Vehicle braking/accelerating and steering will not shift or break StreetPrint®, as often happens with brick pavers. StreetPrint® is very easy to patch, virtually invisibly.

Provided the substrate is in good condition, StreetPrint can be applied as an overlay to existing concrete, asphalt, or stone base. If the existing driveway is asphalt, in good condition, the pavement can be reheated and StreetPrint® can be applied.

StreetPrint® can be used wherever a normal asphalt system is used. However, please contact your local Authorized Applicator to see if these applications are suitable in your area.

StreetPrint® is a continuous surface and its protective surfacing system does not support organic materials, so the weed growth seen with hand laid products is not a problem with StreetPrint®.

The StreetBond® Surfacing System is guaranteed against manufacturer's defects. This guarantee is between the manufacturer and the Authorized StreetPrint® Applicator. Any other warranties, guarantees or promises are the sole responsibility of the Authorized StreetPrint® Applicator.

StreetBond is the surfacing system used with StreetPrint® Pavement Texturing to color and fortify the surface. When cured, StreetBond is an Interpenetrating Network (IPN) which means that, like composite materials or alloys, it is able to produce properties that significantly exceed those of a single component system. StreetBond combines polymer and cement technologies to achieve an exceptional combination of durability, curing characteristics, performance properties and natural appearance.

The StreetPrint Surfacing System uses a coating system known as StreetBond. StreetBond is a water based environmentally friendly product.

The coating is fade resistant and helps to repel harmful UV rays. As with all decorative paving systems there will be some wear over time. Unlike other decorative paving systems the color of your StreetPrint work can be rejuvenated or changed as frequently as you would like, at a fraction of the initial installation cost.

StreetPrint® is less slippery than decorative concrete and is therefore safer for pedestrians.

The pattern in StreetPrint® speeds drying of the surface which makes ice formation less likely. StreetPrint® is made from materials which are unaffected by salt and therefore will not spawl from de-icing salts and weathering. StreetPrint® is a monolithic surface with no trip points, therefore potential damage created by snowplows is rare. Any snowplowing should be done using a rubber guard. This contrasts with hand laid bricks that can be installed at an uneven height or can shift through freeze/thaw or water penetration, creating a plow hazard and a trip point safety hazard.

Maintenance frequencies will depend on the application. Low traffic applications need much less maintenance than commercial or municipal application. Maintenance costs will vary. Please contact your local StreetPrint Applicator.

Try to ensure that the area is flushed with water regularly to remove any abrasive materials (ie. sand/dirt). Use a low pressure, high volume rinse. Abrasive materials on the surface can decrease the life of the coatings. StreetPrint® is resistant to oil, grease and gas, however, it is advisable to remove any spots as soon as possible. Use a mild degreaser, such as "Simple Green", scrub the area with a stiff broom or brush, and follow with a high volume, low-pressure rinse.
Note: Pressure washing is not recommended.

StreetPrint® Pavement Texturing is a proprietary product installed by a network of Authorized Applicators throughout North America and around the globe. As such, the coatings are sold to, and must be installed by, Authorized StreetPrint Applicators.

Answer We also perform Structural Crack Repairs using materials such as Polypatch by Crafco.

Imprint®, is a highly durable hot applied,resin based synthetic asphalt used on crosswalks, intersections and sidewalks with very high traffic volumes. Imprint is placed ½” to ¾” thick. The color is integral throughout the depth so the color does not wear away.

Frequently Asked Questions